Call us now!
1-215-235-4300

Active Shooter Protection

Featured EDI Active Shooter Protection Products

Click View Full Catalog to see All of our Active Shooter Protection products, and more!
Soft Armor Panel Inserts (SAPIs)

Soft Armor Panel Inserts (SAPIs)

EDI-USA manufactures a variety of soft armor panel inserts (SAPIs) for law enforcement and military use.

Tested to level II or III-A (ambient), EDI-USA’s soft ballistic panel inserts are lightweight, compact, and flexible to ensure user comfort. Our soft ballistic panels are cut in standard cuts for ballistic vests ranging in sizes S – 4XL, and can also be cut to fit plate carriers (shooters front cut or rectangle back cut).

All panels are encased in water-resistant nylon and are thermo-sealed or ultrasonic-sealed to prevent the entrance of liquids or humidity during use.

Our level III-A panels are also tested to STANAG 2920 (V50) anti-fragmentation for additional safety protection.

Custom size panels are available upon request and can be manufactured to fit a variety of vest or carrier styles and sizes.

Have more questions about our soft armor panel inserts (SAPI’s)? We’ve got you covered! Please contact us and we are happy to help!

Ballistic Backpack Inserts

Ballistic Backpack Inserts

Protect your child or teen with strong and lightweight ballistic backpack inserts.

Tested to resist up to level III-A ambient ballistic threats – up to .44mag (including 9mm and .357sig). ExecDefense USA’s ballistic backpack inserts are designed to help protect children and teens during active shooter situations.

Designed with strong ballistic material tested up to level III-A (ambient), and cut in an innovated “round” way on top so that backpacks can close easily, these ballistic inserts are lightweight and can help save your child or teen’s life during an emergency.

Easy to insert in any bag or backpack, ExecDefense’s ballistic backpack insert plates are lightweight and flexible. Inserts are available in standard size (10” x 12”) or large size (11” x 14”) and are extremely lightweight so as not to weigh-down for child or teen users.

Need a customized size? Please contact us and one of our bulletproof specialists can help produce inserts in a custom size for your child or teen.

Don’t delay! Get backpack inserts for your loved one(s) today—their life may depend on it.

Have more questions about our ballistic backpack inserts? We’ve got you covered! Please contact us and we are happy to help!

Ready to buy your ballistic backpack insert? You can now order it directly from our dealer site by clicking HERE! Both the standard size and large size are available, with 2-day and overnight shipping options.

Sizes: Standard: 10” x 12” – Normally suggested for children’s backpacks. Large: 11” x 14” – Normally suggested for teen’s backpacks.
HIGH-CUT HELMET (III-A / HG2)

HIGH-CUT HELMET (III-A / HG2)

This item is IN STOCK and ready to ship! Available in black or green, or tan (special order).

Watch our explainer video discussing our High-Cut Helmet:

Designed for high-tactical operations, EDI-USA’s High-Cut Helmet is tested to level III-A (ambient) & HG2 (ambient), keeping users protected while also enabling attachment of radio communication and night vision devices. The helmet features adjustable memory foam cushions on the inside, as well as an adjustable ratchet knob to fine-tune to different head sizes.

Tested to resist ballistic threats up to .44mag, including lower threats such 9mm and .357 sig, this ballistic helmet is lightweight, comfortable, and easy to wear. It provides comprehensive head protection from the forehead to the back of the head, including ear protection.

In addition to being tested to III-A and HG2 ballistic resistance, this helmet is also tested to STANAG 2920 (V50) fragmentation standards to help resist shrapnel and other fragmentation threats during operations.

Our High-Cut Helmet includes one pair of attached picatinny side rails, front mount, adjustable ratchet knob system on the interior, and a pair of bungees.

What makes our High-Cut Helmet special? Unlike other bulletproof helmets, this helmet is equipped with extra-enhanced interior padding that significantly helps reduce brain trauma or internal injuries if shot at by a bullet. The extra-enhanced interior padding system includes seven (7) high-density memory foam pads that make for a comfortable wear. Unlike other ballistic helmets which only include a couple of interior pads, the seven (7) pads in ours are comfortable, lightweight, and also removable for cleaning or replacement. In addition, users can remove some, or all, of the padding in case they need extra space around their head to accommodate cold-weather head gear, or head-mounted communication devices. Our enhanced padding is a huge advantage and will significantly increase your chances of survival and injury if shot — it is hard to find other helmets at our price point that have such a great and high-quality interior padding system.

This helmet can also be produced with customized inner suspension systems, including a smaller “lock & release” ratchet-dial adjustment knob, or a BOA inner suspension knob system.

Tough, strong, and amazing – this ballistic helmet is one of our most popular helmets and provides it all!

Please contact us for any specifications questions or for quotations. Custom colors are available for special orders, including for news crews / PRESS, and EMS / EMT / Paramedics.

This item is IN STOCK and ready to ship!

Are you law enforcement? Please contact us to get your FREE T&E sample of this helmet to try out.

Are you an individual looking to order a bulletproof helmet for yourself FAST & EASY? Visit our dealer site Bulletproof Helmets USA and you can order this helmet online! Use promo code: HELMETS at checkout to get 5% OFF your order. Check it out!

Need this to be TAA-Compliant? Please contact us and one of our TAA-compliance specialists can help send you a quote.

Alternate SKU: E-MT-HC01-HC

This item is available on GSA Advantage! GSA contract number: 47QSWA21D0010

Sizes: M, L, XL
CUSTOM COLORS and INTERIOR SUSPENSION SYSTEMS available
Rifle-Resistant Ballistic Helmet

Rifle-Resistant Ballistic Helmet

The EDI-USA® Rifle Resistant Ballistic Helmet is law enforcement and military’s helmet of choice for comprehensive ballistic head protection for high-risk rifle threats. It consists of three (3) parts:

– EDI-USA® High-Cut Helmet Base. Tested to NIJ III-A ambient ballistic resistance. Includes comfortable anti-trauma padding, and adjustable head ratchet knob system, lending added protection and a secure fit. A durable chinstrap with quick-release function enables immediate one-handed removal. Base is available in two (2) sizes: M/L, and L/XL.

– EDI-USA® Rifle Resistant Helmet Cover, Front. Tested to resist up to 1 shot of rifle round 7.62×51 M80, or 1 shot of rifle round 5.56×45 M193.

– EDI-USA® Rifle Resistant Helmet Cover, Back. Tested to resist up to 1 shot of rifle round 7.62×51 M80, or 1 shot of rifle round 5.56×45 M193.

The base is tested to resist up to the standard four (4) shots of NIJ level III-A ambient threats, and each cover is tested to resist one (1) additional level III shot. The helmet is also tested to STANAG 2920 (V50) fragmentation performance and is manufactured under ISO 9001:2015 production certification.

This helmet has built-in space around both ears to accommodate headphones or other over-ear communication devices. Two (2) picatinny side rails, a dual-attached external bungee, and one (1) front NVG mount allow users to attach additional modifications. This combination, along with our lightweight armor technology, allows for hours of comfortable wear, while also helping to ensure user protection during high-risk operations.

Sizes: M/L & L/XL.

Available colors: Black, OD Green, and Coyote/Desert.

Have questions about this or other products? Please contact us!

Sizes: M/L and L/XL
PASGT HELMET (III-A / HG2)

PASGT HELMET (III-A / HG2)

This item is IN STOCK and ready to ship! Available in black or green, or tan (custom order). Also available in navy blue color for film crews / journalists who need ballistic helmets while in dangerous areas.

EDI-USA’s classic PASGT Helmet, tested to level III-A (ambient) and HG2 (ambient), is one of the most classic and reliable ballistic helmets available. Originally developed for military operations, this helmet is now popular among police, corrections, and everyday people who want to stay protected.

Tested to resist ballistic threats up to .44mag, including lower threats such 9mm and .357 sig, this ballistic helmet is lightweight, comfortable, and easy to wear. It provides comprehensive head protection from the forehead to the back of the head, including ear protection.

In addition to being tested to III-A and HG2 ballistic resistance, this helmet is also tested to STANAG 2920 (V50) fragmentation standards to help resist shrapnel and other fragmentation threats during operations.

The interior of this helmet is lined with durable mesh for a comfortable fit, and includes an adjustable nylon chin strap (or rubber chin cup) to stay sturdy on the user’s head. The suspension system is easily adjustable and fits snugly during use.

Note on suspension system: This helmet is available with a rubber chin cup, or with a double chin strap (without rubber chin cup). Please specify which you would like when ordering. In addition, this helmet can be produced with a ballistic neck protection add-on.

Available in multiple colors, and custom logos and inscriptions for special orders.

New Feature: Ask about our Boltless PASGT Helmet, available for all EDI-USA® PASGT helmet models.

Please contact us with any questions or for any price quotes.

This item is IN STOCK and ready to ship!

Are you law enforcement? Please contact us to get your FREE T&E sample of this helmet to try out.

Are you an individual looking to order a bulletproof helmet for yourself FAST & EASY? Visit our dealer site Bulletproof Helmets USA and you can order this helmet online! Use promo code: HELMETS at checkout to get 5% OFF your order. Check it out!

Need this to be TAA-Compliant? Please contact us and one of our TAA-compliance specialists can help send you a quote.

This item is available on GSA Advantage! GSA contract number: 47QSWA21D0010

Sizes: M, L, XL
CUSTOM COLORS and INTERIOR SUSPENSION SYSTEMS available.
Ballistic Visor (III-A)

Ballistic Visor (III-A)

For high-tactical and high-risk operations, law enforcement choose our ballistic visor to keep them protected.

Specially designed for high-tactical operations, our ballistic helmet (tested to level III-A, ambient) attaches easily to your PASGT, MICH (ACH) or High-Cut Helmet, to help resist bullets. The visor will resist up to .44mag rounds, including 9mm and .357sig, as well as lesser ballistic threats.

Manufactured with triple-coated polycarbonate, our ballistic visors connect well to our ballistic helmets (as well as most other helmet brands), and cover the user’s face. The ballistic polycarbonate in the visor is transparent (95% light transmission).

Our ballistic visors (III-A) are compatible with PASGT / MICH (ACH) helmets (clamp visor style), or with High-Cut Helmets with side rails (picatinny rail adapter style), that slide into the side picatinny rails. Please specify if you want the PASGT / MICH compatible visor, or the High-Cut compatible visor when ordering.

Need anti-laser strips for your ballistic (III-A) visors? We’ve got you covered! Please contact us and we are happy to help!

Sizes: Standard
CLASSIC BALLISTIC SHIELD – Levels: III-A, III, III+ or IV.

CLASSIC BALLISTIC SHIELD – Levels: III-A, III, III+ or IV.

THIS PRODUCT IS IN HIGH DEMAND.  PLEASE CONTACT US ASAP IF YOU NEED PRICING OR TO ORDER.

Ballistic shields are an important part of law enforcement operations, as well as for industrial and personal protection – from patrolling, to SWAT operations, to school or facility security, all places and teams should have a proportional number of ballistic shields in their stock to stay protected.

EDI-USA’s rugged ballistic shields provide ballistic protection tested up to level III-A, III, III+ or IV. Ballistic shields are available in our standard dimensions (half body size: 35.5″ x 19.5″) or jumbo dimensions (full body size: 47″ x 23.5″). We also can manufacture ballistic shields in customized dimensions to fit your specific needs, as well as custom writing on the front in English or other languages.

Our ballistic shields are available in four (4) different ballistic levels, and a tactical specialist at EDI-USA can help you determine the right level for your needs.

III-A: Resists up to .44mag, including lower threats such as 9mm and .357 sig.

III: Resists up to 7.62 FMJ, including lower threats such as pistol / handgun threats.

III+: Resists up to 5.56 M885 Green Tip, including lower rifle threats such as 7.62 FMJ and pistol / handgun threats.

IV: Resists up to .30 AP, including lower rifle threats such as 7.62 FMJ and pistol / handgun threats. We normally suggest including a trolley with this level, as it is heavy to lift by hand.

All of the ballistic levels can also resist the same ballistic level on the shield’s ballistic window (viewport)

Our ballistic shields can include an optional ballistic window (for no additional cost), as well as customized inscriptions and writing on front, and handle systems, including left / right / or ambidextrous handles. Please specify when ordering.

Available with or without lights, and compatible with FoxFury® tactical shield flashlights.

Yes! Ballistic shields are also available for individuals to purchase for home protection or school bullet-resistant protection. Please contact us for more details on how to order.

Please contact us with any questions or for any price quotes. Many departments like to keep a ballistic shield in their patrol cars, and we can help you decide which dimension of shield would be best to fit in your patrol car.

Item usually has a 1–2 week lead time.

Need this to be TAA-Compliant? Please contact us and one of our TAA-compliance specialists can help send you a quote.

Need to buy a ballistic shield RIGHT NOW? Please visit our dealer website HERE and you can order a level III-A or level III ballistic shield right away! Otherwise, please contact us for a quote for your department, agency, or company.

This item is available on GSA Advantage! GSA contract number: 47QSWA21D0010

Sizes: 35.5” x 19.6” (90cm x 50cm) 47.2” x 19.6” (120cm x 50cm) Custom sizes available
V-CUT BALLISTIC SHIELD

V-CUT BALLISTIC SHIELD

A strong ballistic shield designed for patrolling, SWAT, or entries, the V-Cut Ballistic Shield is available in levels III-A, III, and III+ and features double-side ports for users to insert or rest their firearms during operations.

Resisting up to .44mag, as well as 9mm and .357 sig, (for level III-A) or up to 7.62 FMJ (for level III) this ballistic shield is lightweight to carry, and includes a durable horizonal handle bar, and arm / body strap for maximum control during use.

Operators find this shield very useful because they can rest a firearm on the two (2) firearm rests, while holding the shield with one hand over their face / body.

Customized inscriptions available for front side.

This ballistic shield is compatible with FoxFury’s shield light (attachable).

Please contact us for more information!

Sizes: 31.5" (H) x 19.5" (W)
Side Ballistic Plates

Side Ballistic Plates

Hard Armor Plates (HAPs) designed for side use are important to help enhance user safety against bullets that may be shot from the user’s exposed sides. These side plates are typically smaller than standard armor plates and are very lightweight to help the user feel comfortable and mobile during tactical operations.

EDI-USA’s side ballistic plates are available in two (2) sizes and can be inserted into the sides of plate carriers or bullet-resistant vests with space for side plates. EDI’s side ballistic plates are tested to level III or IV ballistic resistance, and are available in ICW or Stand Alone models.

Custom sizes are available for production.

Have more questions about our side ballistic plates? We’ve got you covered! Please contact us and we are happy to help!

Sizes: Standard: 6" x 6" Large: 6" x 8"
III Hard Armor Plate (ICW)

III Hard Armor Plate (ICW)

Designed for tactical operations, ExecDefense’s hard armor plates (HAP) are worn in conjunction with (ICW) III-A ballistic vests, and are tested to level III ballistic resistance (ambient), to resist up to 7.62 FMJ rounds, and 5.56mm rounds.

These plates are available in shooter’s cut (front style) or rectangular cut (back style) and are lightweight and mobile – ideal for tactical and non-tactical situations.

Each plate is manufactured with durable hard blocks of propriety ballistic material, and is held together by a durable layer of soft armor. The plate is then wrapped in a layer of durable black nylon and is sealed to help prevent entrance of liquid of humidity.

Looking for a custom size or weight ballistic plate? Or other custom options such as monolithic or different cuts, such as side cuts? Please contact us, and one of our trusted body armor specialists can help provide a customized quote for your ballistic plate project.

TAA-Compliant Ballistic Plates Available.

This item is available on GSA Advantage! GSA contract number: 47QSWA21D0010

III Hard Armor Plate (Stand Alone)

III Hard Armor Plate (Stand Alone)

Designed for tactical operations, ExecDefense’s hard armor plates (HAPs) are worn in a “stand-alone” way (without needing to use a III-A vest), and are tested to level III ballistic testing (ambient), to resist up to 7.62 FMJ rounds, and 5.56mm rounds.

These plates are available in shooter’s cut (front style) or rectangular cut (back style) and are lightweight and mobile – ideal for tactical and non-tactical situations.

Each plate is manufactured with durable hard blocks of propriety ballistic material, and is held together by a durable layer of soft armor. The plate is then wrapped in a layer of durable black nylon and is sealed to help prevent entrance of liquid of humidity.

Looking for a custom size or weight ballistic plate? Or other custom options such as monolithic or different cuts, such as side cuts? Please contact us, and one of our trusted body armor specialists can help provide a customized quote for your ballistic plate project.

TAA-Compliant Ballistic Plates Available.

This item is available on GSA Advantage! GSA contract number: 47QSWA21D0010

IV HARD ARMOR PLATE (STAND ALONE)

IV HARD ARMOR PLATE (STAND ALONE)

Manufactured to resist up to level IV ballistic threats, our standalone level IV hard armor plates (HAPs) are designed for high-tactical operations. Tested to resist up to 7.62 AP rounds (ambient), as well as lower threats, our level IV ballistic plates are designed in a standalone construction to be used without the need of a III-A vest.

Our strong ballistic plates are available in shooter’s cut (front style) or rectangular cut (back style) and are lightweight and mobile – ideal for tactical and non-tactical situations. Also available in side-cut plate styles.

Each plate is manufactured with durable hard blocks of propriety ballistic material, and is held together by a durable layer of soft armor. The plate is then wrapped in a layer of durable black nylon and sealed to help prevent entrance of liquid of humidity.

Looking for a custom size or weight ballistic plate? Or other custom options such as monolithic or different cuts, such as side cuts? Please contact us, and one of our trusted body armor specialists can help provide a customized quote for your ballistic plate project.

Our level IV plates are TAA-Compliant and we also provide NIJ Certified IV plates if you require NIJ certification.

Have more questions about our level IV ballistic plates? We’ve got you covered! Please contact us and we are happy to help!

EMS / EMT MICH BALLISTIC HELMET (NAVY BLUE)

EMS / EMT MICH BALLISTIC HELMET (NAVY BLUE)

EDI-USA’s MICH Ballistic Helmet, designed for EMS / EMT first responders and paramedic teams, is the ballistic helmet of choice when providing emergency care in dangerous environments.

Tested to ballistic level III-A (ambient) and HG2 (ambient), as well as to STANAG 2920 (V50) ballistic fragmentation standards, this helmet is strong and resistant, and is available with or without side rails & front mount. Equipped with strong interior padding for maximum comfort and an adjustable chin strap, this helmet is lightweight, comfortable and easy to wear.

This helmet is available in navy blue color to help clearly identify the user. It is also available in custom colors (if required) and can have EMS, EMT, MEDIC, or other words printed on the front and back (custom production). Please contact us if you require a custom quote.

Note on suspension system: This helmet is available with a rubber chin cup, or with a double chin strap (without rubber chin cup). In addition, the interior suspension system can be manufactured with an adjustment ratchet knob. Please specify when ordering which you would like.

If you are looking for our PASGT Helmet or High-Cut Helmet in navy blue color for EMT / EMS / Paramedic operations, please contact us.

Have more questions about our navy blue EMS / EMT ballistic helmet? We’ve got you covered! Please contact us and we are happy to help!

EMS / EMT PLATE CARRIER

EMS / EMT PLATE CARRIER

The EMS / EMT plate carrier is designed for use by paramedics and other first responders who are called to work in dangerous areas. This plate carrier vest is trusted by many medical first responders and is an important item to help keep workers safe during their operations.

Produced in a sleek, comfortable, and breathable design, this plate carrier vest is available in navy blue color for visibility with an over-sized Velcro patch on the front and back to identify the user. The carrier includes adjustable shoulder and waist straps (clips) for comfort and security.

Designed to support comprehensive ballistic protection, this plate carrier does not include any ballistic protection, and can fit standard level III, III+ and IV hard armor plates (HAPs) in the front and back (shooters cut only). If you need help choosing hard armor plates (HAPs), please contact us. In addition, this vest is also available to be produced with level III-A soft armor panels, and can be upgraded to include anti-stab and anti-spike protection built into it, upon request. Please contact us for agency or individual orders that require the ballistic panels or plates to be within this plate carrier vest.

To help support medical personnel, this vest includes MOLLE webbing line on the front and back, so you can attach pouches, radios or other MOLLE-compatible accessories to the vest.

This plate carrier vest is available in navy blue color, and can be custom-designed in additional colors upon request.

This plate carrier vest is available with over-sized EMS, EMT, PARAMEDIC and other Velcro patches for the front & back. Custom colors also available upon request.

Have more questions about our EMS / EMT plate carrier vest? We’ve got you covered! Please contact us and we are happy to help!